Detailed Installation Steps  

Step 1: Make the foundation

                              Model 1                                                Model 2

Step 2: Measure the size and set the line

Step 3: Carry the panel in position

Step 4: Cut the panel in need

Step 5: Erect the panel

Step 6: Upright the panel

Step 7: Adjust the panel

Step 8: Join the panel with PU Foam

Step 9: Knock the steel bar (30cm length) into the top of two panels by 45 degree.

Step 10: Leave a door hole

Step 11: Leave a window hole

Step 12: The gable

Step 13: The horizontal press panel

Step 14: The wall finished

                                  Model 1 A wall finished

                                     Model 1 Half finished

                                  Model 1 All the wall finished

                                                    Model 2 A wall finished

                               Model 2 Half finished

                                             Model 2 All the wall finished

Step 15: Stick the anti-crack tape with putty powder

Step 16: Install the roof

                                      Model 1 Installed with roof iron

                                       Model 2 Installed with DAQUAN PANEL

Step 17: Install the electrical wires and switches

Step 18: Install the door frame and door

Step 19: Install the window

Step 20: Decorate with cetamic tiles or painting, wall paper and so on.

Overview

                                                         Model 1

 http://v.youku.com/v_show/id_XNjk0MjA4NDAw.html?from=s1.8-1-1.2